Whynter Beverage Dispenser WC 2128D User Manual

Whynter 21 Bottle Dual Temperature Zone  
Touch Control Freestanding Wine Cooler  
MODEL# : WC-212BD  
Instruction Manual  
Thank you for your purchase of this WHYNTER product. Please read this Instruction Manual carefully before using product  
to ensure proper use. Keep this manual in a safe place for future reference.  
 
1. Parts and Features  
1. DOOR HINGE  
3. FAN MASK  
5. FOOT  
2. INTERIOR LIGHT  
4. WINE RACK  
6. UPPER TEMPERATURE DISPLAY  
7. UPPER TEMPERATURE  
CONTROL  
8. LOWER TEMPERATURE  
DISPLAY  
9. LOWER TEMPERATURE  
CONTROL  
10.HANDLES  
11. TEMPERED GLASS DOOR  
 
2. Technical Data  
Model no.  
WC-212BD  
Capacity  
60L (21 standard wine bottles)  
Voltage  
Current  
Input power  
Power  
100-120v  
2.0Amp  
140W  
1.2(59°F)  
Consumption(KW.h/24h)  
Max Temperature  
Difference  
64°F  
Temperature Control  
Range  
Net weight  
Up Zone 44-66 ºF (7-18Ԩ)  
Lower Zone 50-66 ºF (10-18Ԩ)  
45 lbs  
Gross weight  
Product size(W×H×D)  
50 lbs  
13.5” × 31.5” × 20” (21.5” with  
handle installed)  
Packing size(W×H×D)  
15” × 33.5” × 21.6”  
 
3. Important Safety Instructions  
To reduce the risk of fire, electrical shock, or injury when using your  
appliance, follows these basic precautions  
Do not use if the power supply cord is damaged. If damaged, it must be replaced  
by a qualified electrician.  
This wine cooler is not intended for use by young children or physically-  
challenged persons without supervision/assistance. Young children must be  
supervised to ensure safety around this or any appliance.  
Ensure the unit is unplugged before cleaning or when not in use.  
To clean the unit, use only mild detergents or glass cleaning products. Never use  
harsh detergents or solvents.  
Do not use this wine cooler with an extension cord or power board. Please  
ensure that the appliance is plugged directly into the electrical outlet.  
When positioning the wine cooler, ensure that there is at least a 4” clearance at  
the sides and a 6” clearance at the back. This will allow for adequate ventilation  
of any heat generated by the freestanding wine cooler.  
This cooler is designed to store wine bottles. If food is stored inside, ensure that  
there is sufficient airflow between items. Please note that the temperature range  
for this cooler is optimized for wine and beverage storage. Perishable food items  
may require a different storage environment.  
Do not place hot food or beverages into the wine cooler.  
Close the cooler door immediately after putting in any items to keep the internal  
temperature relatively constant.  
Keep appliance away from any heat source or direct sunlight.  
For a stable installation, make sure the appliance is placed on a flat, level and  
solid surface.  
Ensure that the surface on which the wine cooler is placed is strong enough to  
hold the wine cooler and the items stored inside.  
Avoid placing any objects on top of the wine cooler.  
The wine cooler is an electrical appliance. To avoid injury from electrical shock  
do not operate the Wine Cooler with wet hands, while standing on a wet surface  
or while standing in water. Do not use outdoors or in wet conditions.  
When positioning or moving the appliance ensure that it is not turned up side  
down or greater than 45° or more off level.  
Never pull the cord to disconnect it from the outlet. Grasp the plug and pull it from  
the outlet.  
Never lift or carry the wine cooler by the power cord.  
This wine cooler is designed for household, non-commercial use only. Any other  
use will void the warranty.  
Do not plug into the power outlet before set up is completed.  
 
An empty cooler can be a hazardous for children or small pets. If disposing of the  
cooler remove gasket seals, latches, lids or the entire door from your unused  
appliance, or take other action to ensure the cooler is harmless.  
Do not cut or remove the ground prong from the power cord.  
Do not move this appliance without emptying it and securing the door in a closed  
position.  
 
4. Installation  
Before using your wine cooler  
Remove the exterior and interior packaging material  
Stand the unit upright for approximately 2 hours before connecting to the power  
source. This will reduce the possibility of a malfunction in the cooling system from  
handling during transportation.  
Clean the interior surface with a soft cloth and warm water.  
Place your appliance on a floor that is strong enough to support the appliance when  
it is fully loaded.  
Do not place the appliance in an enclosed space or under direct sunlight or sources  
of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating  
and heat sources may increase the ambient temperature and electrical consumption.  
Extreme cold or hot ambient temperatures may also cause the appliance to  
malfunction.  
Allow up to 24 hours of operation for the wine bottles to reach the desired  
temperature.  
Electrical Connection  
Warning  
Improper use of the grounded plug can result in the risk of electrical shock. If the  
power cord is damaged, have it replaced by a qualified electrician.  
This appliance should be properly grounded for your safety. The power cord of this unit is  
equipped with a 3-pin plug to minimize the possibility of electrical shock. Do not under any  
circumstances cut or remove the ground wine from the power cord supplied.  
Use of extension cords is not recommended.  
This unit requires a standard 110V-60HZ electrical outlet with 3-pin plug.  
To prevent accidental injury, the power cord should be secured behind the wine refrigerator and  
not left exposed or dangling.  
 
5. Operations  
Temperature Setting  
It is recommended that you install the wine cooler in a place where the ambient temperature is  
between (60- 80°F). If the ambient temperature is above or below recommended temperatures,  
the performance of the unit may be affected. For example, placing in extreme cold or hot  
conditions may cause interior temperature to fluctuate thus the set temperature may not be  
achievable.  
You can set the wine cooler temperature by pressing the “ ” and “ ” buttons on the control  
panel.  
Temperature settings for upper zone: 44ºF-66ºF  
Temperature settings for lower zone: 50ºF-66ºF  
Generally for red wines, the temperature range should be between 57ºF – 61ºF and for white  
wines, the temperature range should be 50ºF - 54ºF. This is based on an ambient room  
temperature of 77ºF.  
Interior Light  
You can turn on and off the interior light by pressing the “Light” button. The “Light” button on the  
left side controls the upper zone light and the “Light” button on the right side controls the lower  
zone light.  
Handle Bars  
Your wine cooler comes with two towel bar style handles. To install the handle, you will need a  
Phillips-head screwdriver.  
Open the door of the wine cooler.  
Located the two screw holes on the inside of the door (they may be partially obscured by  
the door seal so you may need to remove the door seal)  
Insert the screws into the screw holes until they stick out of the front of the door.  
Line up the holes in the handle with the screws and give each screw about 2-4 full turns  
into the handle bar.  
Now the turn the screws in all the way, and your handles are installed.  
Replace seal into door frame.  
Bottle Capacity  
This wine cooler is designed to store 6 bottles in the upper zone and 15 bottles in the lower  
zone. The bottle capacity listed for your wine cooler is an estimated maximum capacity based  
on a standard 750ml wine bottle. For other size bottles, the capacity will vary.  
 
Leveling Legs  
Your wine cooler comes with four leveling legs. To adjust these legs, carefully lean the wine  
cooler to one side (make sure it is emptied and the door is secured) and unscrew the legs to  
make them longer. Screw the legs tighter to make them shorter. This wine cooler is not  
designed to operate without the leveling legs  
Wine Racks  
The individual wine racks have a slight difference between the top and a bottom of the racking.  
If you are having trouble fitting the maximum number of bottles of wine in the wine cooler, try  
flipping the wine racks over to accommodate the shape of the bottle.  
Air Filter  
Your wine cooler has a washable air filter over the air intake in the back. Periodically, this air  
filter should be cleaned. Remove the air filter and gently wash it in a solution of mild detergent  
and water. Make sure it is completely dry before installing it back to the air intake.  
Energy Saving Tips  
Do not locate the wine cooler in direct sunlight or any heat generating sources. Let any warm  
items cool before placing them in the wine cooler.  
6. Care and Maintenance  
Cleaning your wine cooler  
Unplug the wine cooler.  
Remove all items from the wine cooler.  
Wipe the inside and outside surface with a mild soap.  
Wash the wine racks with a mild soap.  
Dry any moist parts with a soft cloth.  
Moving your wine refrigerator  
Unplug the wine cooler.  
Remove all items from the wine cooler.  
Securely tape the door of the wine cooler.  
Turn the leveling legs (tightly shorten) up to the base to avoid damage.  
Be sure the wine cooler stays in the upright position during transportation.  
The ideal packaging for the wine cooler is its original packaging. Please keep the original  
packaging and repack the wine cooler if you need to transport the unit.  
 
7. Troubleshooting  
You can solve many common problems by referring the troubleshooting suggestions  
listed below.  
Symptoms  
Possible causes  
Solutions  
The wine cooler  
does not turn on.  
There is a power failure.  
The cooler is not plugged in.  
Ensure the cooler is plugged in and the power outlet  
has power.  
A house fuse has blown or the  
circuit breaker is tripped.  
The cooler is placed too close to  
a heat source.  
Replace the broken fuse or reset the breaker.  
The wine cooler is  
not reaching the  
desired  
Keep the cooler away from sunshine or other heat  
sources.  
temperature.  
The cooler does not have  
sufficient ventilation.  
Make sure the wine cooler has at least 4” of  
ventilation on the sides and 6” at the back in a  
freestanding setup.  
The door is opened too frequently Close the door tightly and do not open the door too  
or for a long period of time.  
frequently or for a long period of time.  
Ambient temperature too high or  
too low.  
The ideal ambient temperature for the wine cooler to  
work is between 68F – 73F.  
Frost forming inside The environment is too humid.  
the wine cooler.  
Although this unit uses an auto-defrost system, under  
certain conditions, manual defrosting may required. If  
frost builds up, try running the cooler on a warmer  
temperature setting.  
The ambient temperature is too  
low.  
Close the door tightly and do not open the door too  
frequently or for a long period of time.  
The door is opened too frequently Unplug the unit to allow the frost to melt.  
or for a long period of time.  
The wine cooler  
turns on and off  
frequently.  
The ambient temperature is too  
low or high.  
Decrease or increase the ambient temperature.  
Minimize the number of times the door is opened.  
Make sure the door is tightly closed.  
The door is being opened often.  
The door is not completely  
closed.  
The door gasket is not sealing  
properly.  
Make sure the door gasket is properly sealed.  
The cooler does not have the  
suggested ventilation.  
Make sure the cooler has at least 4” on the sides and  
6” in the back for clearance.  
The wine cooler  
makes too much  
noise.  
If the noise is from the fan, it may The fan makes normal fan noises.  
be normal operating noise.  
The unit is not level.  
Make sure the cooler is on a hard and level surface.  
Do not place the wine cooler on carpet.  
 
Some popping or cracking noises are normal. They  
are caused by expansion and contraction of the  
inside walls due to temperature changes.  
Popping or cracking noises are  
coming from the unit.  
The unit is not level.  
Make sure the cooler is on a level surface.  
The door will not  
shut properly.  
The door gasket is dirty.  
Clean the door gasket.  
The door gasket is malformed.  
Make sure the door gasket is properly sealing.  
Correctly install the shelves.  
The shelves are incorrectly  
installed.  
 
To obtain service or information, contact  
Whynter LLC via email at [email protected] or call  
866-WHYNTER.  
Product contents and specifications may change without notice.  
Copyright © 2012 Whynter LLC  
 

Weed Eater Trimmer 545186748 User Manual
Weider Home Gym 831159821 User Manual
Whirlpool Air Conditioner ACQ082XK1 User Manual
Whirlpool Dishwasher W10282549A User Manual
Whirlpool Range W10545225B User Manual
White Rodgers Home Theater Server 47D43 811 User Manual
Williams Sound Amplified Phone TEL 40 User Manual
Wybron Power Supply DPS850 User Manual
Yamaha Motorcycle FJR1300 User Manual
Zebra Technologies Label Maker APL I User Manual